Unified Communication Use Cases

DHCP Server

Wazo includes a DHCP server used for assisting in the provisioning of phones and other devices. (See Basic Configuration for the basic setup). This section contains additional notes on how to configure more advanced options that may be helpful when integrating the server with different VOIP subnets.

Activating DHCP on another interface

DHCP Server can be activated through /dhcp endpoint

By default, it will only answer to DHCP requests coming from the VoIP subnet. If you need to activate DHCP on an other interface, you have to fill in the network_interfaces field with the interface name , for example : eth0

Changing default DHCP gateway

By default, the Wazo DHCP server uses the Wazo's IP address as the routing address. To change this you must create a custom-template:

Create a custom template for the dhcpd_subnet.conf.head file:

mkdir -p /etc/xivo/custom-templates/dhcp/etc/dhcp/
cd /etc/xivo/custom-templates/dhcp/etc/dhcp/
cp /usr/share/xivo-config/templates/dhcp/etc/dhcp/dhcpd_subnet.conf.head .

Edit the custom template:
```
vim dhcpd_subnet.conf.head
```
In the file, replace the string #XIVO_NET4_IP# by the routing address of your VoIP network, for example:
```
option routers 192.168.2.254;
```
Re-generate the dhcp configuration:
```
xivo-update-config
```

DHCP server should have been restarted and should now use the new routing address.

Configuring DHCP server to serve unknown hosts

By default, the Wazo DHCP server serves only known hosts. That is:

either hosts which MAC address prefix (the OUI) is known
or hosts which Vendor Identifier is known

Known OUIs and Vendor Class Identifiers are declared in /etc/dhcp/dhcpd_update/* files.

If you want your Wazo DHCP server to serve also unknown hosts (like PCs) follow these instructions:

Create a custom template for the dhcpd_subnet.conf.tail file:

mkdir -p /etc/xivo/custom-templates/dhcp/etc/dhcp/
cd /etc/xivo/custom-templates/dhcp/etc/dhcp/
cp /usr/share/xivo-config/templates/dhcp/etc/dhcp/dhcpd_subnet.conf.tail .

Edit the custom template:
```
vim dhcpd_subnet.conf.tail
```
And add the following line at the head of the file:
```
allow unknown-clients;
```
Re-generate the dhcp configuration:
```
xivo-update-config
```

DHCP server should have been restarted and should now serve all network equipments.

DHCP-Relay

If your telephony devices aren't located on the same site and the same broadcast domain as the Wazo DHCP server, you will have to add the option DHCP Relay to the site's router. This parameter will allow the DHCP requests from distant devices to be transmitted to the IP address you specify as DHCP Relay.

Warning: Please make sure that the IP address used as DHCP Relay is the same as one of Wazo's interfaces, and that this interface is configured to listen to DHCP requests (as described in previous part). Also verify that routing is configured between the distant router and the chosen interface, otherwise DHCP requests will never reach the Wazo server.

Configuring DHCP server for other subnets

This section describes how to configure Wazo to serve other subnets that the VOIP subnet. As you can't use the Web Interface to declare other subnets (for example to address DATA subnet, or a VOIP subnet that isn't on the same site that Wazo server), you'll have to do the following configuration on the Command Line Interface.

Creating "extra subnet" configuration files

First thing to do is to create a directory and to copy into it the configuration files:

mkdir /etc/dhcp/dhcpd_sites/
cp /etc/dhcp/dhcpd_subnet.conf /etc/dhcp/dhcpd_sites/dhcpd_siteXXX.conf
cp /etc/dhcp/dhcpd_subnet.conf /etc/dhcp/dhcpd_sites/dhcpd_lanDATA.conf

Note: In this case we'll create 2 files for 2 differents subnets. You can change the name of the files, and create as many files as you want in the folder /etc/dhcp/dhcpd_sites/. Just adapt this procedure by changing the name of the file in the different links.

After creating one or several files in /etc/dhcp/dhcpd_sites/, you have to edit the file /etc/dhcp/dhcpd_extra.conf and add the according include statement like:

include "/etc/dhcp/dhcpd_sites/dhcpd_siteXXX.conf";
include "/etc/dhcp/dhcpd_sites/dhcpd_lanDATA.conf";

Adjusting Options of the DHCP server

Once you have created the subnet in the DHCP server, you must edit each configuration file (the files in /etc/dhcp/dhcpd_sites/) and modify the different parameters. In section subnet, write the IP subnet and change the following options (underlined fields in the example):

subnet 172.30.8.0 netmask 255.255.255.0 {

subnet-mask:
```
option subnet-mask 255.255.255.0;
```
broadcast-address:
```
option broadcast-address 172.30.8.255;
```
routers (specify the IP address of the router that will be the default gateway of the site):
```
option routers 172.30.8.1;
```

In section pool, modify the options:

pool {

log (add the name of the site or of the subnet):

log(concat("[", binary-to-ascii(16, 8, ":", hardware), "] POOL VoIP Site XXX"));

range (it will define the range of IP address the DHCP server can use to address the devices of that subnet):
```
range 172.30.8.10 172.30.8.200;
```

Warning: Wazo only answers to DHCP requests from supported devices. In case of you need to address other equipment, use the option allow unknown-clients; in the /etc/dhcp/dhcpd_sites/ files.

At this point, you can apply the changes of the DHCP server with the command:

service isc-dhcp-server restart

After that, Wazo will start to serve the DHCP requests of the devices located on other sites or other subnets than the VOIP subnet. You will see in /var/log/daemon.log all the DHCP requests received and how they are handled by Wazo.

Table of Contents