Provd Plugins > Gigaset > N870E IP PRO

Role

The Gigaset Nx70 IP Pro needs to be set to the correct role to work with Wazo. By default, the N870 is set only as a base, which means that it does not provide a web interface and needs an external DECT manager to be able to work properly. It is necessary to set it to the All-in-one role if you want to use it with Wazo. See the Gigaset documentation to know how to change the role.

Handset authentication code

In order for the handsets to associate with the DECT base station, it is necessary to enter a PIN in the register menu on the handset. The authentication code for a device in autoprov mode is 0000. For all subsequent handsets, the code is the last four digits of the line extension (e.g. if you have the 421234 extension, the code will be 1234). If the line extension is less than four digits long, leading zeros will be added (e.g. 1 will have the code 0001).

The Gigaset Nx70 IP Pro does not support setting the extension to call for call forwarding, do not disturb, etc.

Role

The Gigaset Nx70 IP Pro needs to be set to the correct role to work with Wazo. By default, the N870 is set only as a base, which means that it does not provide a web interface and needs an external DECT manager to be able to work properly. It is necessary to set it to the All-in-one role if you want to use it with Wazo. See the Gigaset documentation to know how to change the role.

Handset authentication code

In order for the handsets to associate with the DECT base station, it is necessary to enter a PIN in the register menu on the handset. The authentication code for a device in autoprov mode is 0000. For all subsequent handsets, the code is the last four digits of the line extension (e.g. if you have the 421234 extension, the code will be 1234). If the line extension is less than four digits long, leading zeros will be added (e.g. 1 will have the code 0001).

The Gigaset Nx70 IP Pro does not support setting the extension to call for call forwarding, do not disturb, etc.

Role

The Gigaset Nx70 IP Pro needs to be set to the correct role to work with Wazo. By default, the N870 is set only as a base, which means that it does not provide a web interface and needs an external DECT manager to be able to work properly. It is necessary to set it to the All-in-one role if you want to use it with Wazo. See the Gigaset documentation to know how to change the role.

Handset authentication code

In order for the handsets to associate with the DECT base station, it is necessary to enter a PIN in the register menu on the handset. The authentication code for a device in autoprov mode is 0000. For all subsequent handsets, the code is the last four digits of the line extension (e.g. if you have the 421234 extension, the code will be 1234). If the line extension is less than four digits long, leading zeros will be added (e.g. 1 will have the code 0001).

The Gigaset Nx70 IP Pro does not support setting the extension to call for call forwarding, do not disturb, etc.